The Relationship between Drinking Water Consumption, Nutritional Status and Workload with The Incidence of Heat Strain in Tofu-Making Workers in West Kekalik Sub-District

Authors

  • Baiq Fathin Ayu universitas pendidikan mandalika, Indonesia
  • Kardi Kardi Prodi Kesehatan Masyarakat, Fakultas Ilmu Keolahragaan dan Kesehatan masyarakat, IKIP Mataram. Jl. Pemuda No. 59A, Mataram, Indonesia. Postal code: 83125, Indonesia
  • Janur Wanda Prodi Kesehatan Masyarakat, Fakultas Ilmu Keolahragaan dan Kesehatan masyarakat, IKIP Mataram. Jl. Pemuda No. 59A, Mataram, Indonesia. Postal code: 83125, Indonesia

DOI:

https://doi.org/10.33394/hjkk.v12i3.12373

Keywords:

heat starin, workload, drinking water consumption

Abstract

Various cases of accidents and occupational diseases, as well as other health problems are often caused by unqualified work environment factors, Workers in a hot environment are one of the causes of workers experiencing occupational diseases. Heat strain is an acute or chronic impact caused by exposure to heat stress experienced by a person from physical and mental aspects. The physical impact caused by heat strain ranges from mild complaints such as skin rashes to fainting to life-threatening situations when there is a cessation of sweating and heat stroke. Tofu making is one of the hot working environments. This study uses a quantitative method with a sampling technique using a purposive sampling technique. The sample in this study is 44 tofu makers. The data collection technique uses questionnaires and pulse measurement. Data analysis uses the Spearman Rank test. The results showed that there was a relationship between drinking water consumption and heat strain activity with a value (p = 0.000), there was no relationship between BMI (p = 0.113) and there was a relationship between workload and heat strain incidence (p = 0.000) and heat strain complaints in tofu factory workers. It is expected that workers consume >11 glasses of drinking water and use clothes that can reflect heat such as wearing thin clothes, wearing loose shirts and easily absorbing sweat.

References

Abidin, Z., & Widagdo, S. (2009, November). Studi literatur tentang lingkungan kerja fisik perkantoran. In Jurnal Seminar V SDM Teknologi Nuklir, Yogyakarta.

Adiningsih, R. (2013). Faktor yang Mempengaruhi Kejadian Heat strain pada Tenaga Kerja yang Terpapar Panas di PT Aneka Boga Makmur. The Indonesian Journal of Occupational Safety and Health, 2(2), 145-153.

Anggraini, M. T. (2022). Hubungan Beban Kerja Fisik dan Durasi Kerja dengan Kejadian Heat Strain Pada Pekerja Industri Kerupuk. Jurnal Ilmiah Kesehatan, 21(2).

Berry, C., McNeely, A., & Beauregard, K. (2011). A guide to preventing heat stress and cold stress. NC Department of Labor Occupational Safety and Health Program.

Centers For Disease Control (Ed.). (2018). NIOSH criteria for a recommended standard: occupational exposure to heat and hot environments. National Institute on Drug Abuse.

Depkes RI., 2003. Modul Pelatihan bagi Fasilitator Kesehatan Kerja. Jakarta; Pusat Kesehatan Kerja

Djollong, A. F. (2014). Tehnik Pelaksanaan Penelitian Kuantitatif. Istiqra: Jurnal Pendidikan Dan Pemikiran Islam, 2(1).

Fadhila, A. N., & Santiasih, I. (2021). Kenyamanan Termal Dan Faktor Individu Yang Mempengaruhi Kejadian Heat strain Pada Pekerja Labelling Canning. Envirotek: Jurnal Ilmiah Teknik Lingkungan, 13(1), 60-65.

Flouris, Andreas D., Petros C. Dinas, Leonidas G. Ioannou, Lars Nybo, George Havenith, Glen P. Kenny, and Tord Kjellstrom. "Workers' health and productivity under occupational heat strain: a systematic review and meta-analysis." The Lancet Planetary Health 2, no. 12 (2018): e521-e531.

Hoorfarasat, G., Jafari, M. J., Omidi, L., Salehpour, S., Khodakarim, S., & Haydarnezhad, N. (2015). Correlation between heat strain score index and WBGT index with physiological parameters in a glass manufacturing plant. International Journal of Occupational Hygiene, 7(4), 201-208.

Ihsan, M., Fathimahhayati, L. D., Pawitra, T. A., Industri, T., & Teknik, F. (2019). Analisis beban kerja dan penentuan tenaga kerja optimal dengan metode Workload Analisis dan ECRS Analysis of Workload and Determination of Optimal Amount of Labour Using Workload Analysis and Ecrs Methods. JIME (Journal of Industrial and Manufacture Engineering), 3(2), 72-78.

Juliana, M., Camelia, A., & Rahmiwati, A. (2018). Analisis faktor risiko kelelahan kerja pada karyawan bagian produksi PT. Arwana anugrah keramik, tbk. Jurnal Ilmu Kesehatan Masyarakat, 9(1), 53-63.

Kalpika. (2010). Perbedaan Denyut Nadi Sebelum Dan Sesudah Bekerja Pada Iklim Kerja Panas Di Unit Workshop PT. Indo Acidatama Tbk. Kemiri, Kebakkramat Karanganyar. (Skripsi). Surakarta: Universitas Sebelas Maret.

Marif, A. (2013). Faktor-faktor yang Berhubungan dengan Kelelahan pada Pekerja Pembuatan Pipa dan Menara Tambat Lepas Pantai (EPC3) di Proyek Banyu Urip PT Rekayasa Industri, Serang-Banten Tahun 2013.

Nakamura, Y., Watanabe, H., Tanaka, A., Yasui, M., Nishihira, J., & Murayama, N. (2020). Effect of increased daily water intake and hydration on health in Japanese adults. Nutrients, 12(4), 1191.

Nawawinetu, E.D., 2010. Modul Kuliah Heat Stress. Surabaya: Universitas Airlangga.

NIOSH. (2016). Criteria for a Recommended Standartd: Occupational Exposure to Heat and Hot Environtments. Amerika Serikat: National Institute for Occuptional Safety and Health.

Nofianti, D. W., & Koesyanto, H. (2019). Masa kerja, beban kerja, konsumsi air minum dan status kesehatan dengan regangan panas pada pekerja area kerja. HIGEIA (Journal of Public Health Research and Development), 3(4), 524-533.

Occupational Safety and Health Service. (1997). Guidelines For The Management Of Work In Extreme Of Temperature. Occupational Safety and Health Service and Health Servuce Department of Labour

Permendagri No. 12 tahun, 2008, tentang Pedoman Analisis Beban Kerja. Website : http://kemendagri.go.id

Puspita, A. D., & Widajati, N. (2020). Gambaran Iklim Kerja Dan Tingkat Dehidrasi Pekerja Shift Pagi Di Bagian Injection Moulding 1 PT. X Sidoarjo. Journal of Public Health Research and Community Health Development, 1(1), 13.

Ramadhanti, A. A. (2020). Status Gizi dan Kelelahan terhadap Produktivitas Kerja. Jurnal Ilmiah Kesehatan Sandi Husada, 9(1), 213-218.

Saputra, D., Subakir, S., & Hapis, A. A. (2022). Faktor yang berhubungan dengan keluhan heat strain pada pekerja pabrik tahu di kecamatan jelutung. Jurnal Inovasi Penelitian, 2(12), 3899-3904.

Sari, M. P. (2017). Iklim Kerja Panas dan Konsumsi Air Minum Saat Kerja Terhadap Dehidrasi. HIGEIA (Journal of Public Health Research and Development), 1(2), 108-118.

Sugeng, B., Jusuf, R. M. S., & Pusparini, A. (2003). Bunga Rampai Hiperkes dan Keselamatan Kerja. Semarang: Badan Penerbit Universitas Diponegoro.

Suma’mur, P. K. (2009). Corporate Hygiene and Occupational Health. Jakarta: CV Sagung Seto.

Suma’mur, P. K. (2014). Company Hygiene and Work Safety. CV Haji Mas Agug Seto.

Suprabaningrum, A. R., & Dieny, F. F. (2017). Hubungan konsumsi cairan dengan status hidrasi pekerja di suhu lingkungan dingin. Journal of Nutrition College, 6(1), 76-83.

Tarwaka, B. S. Ergonomi untuk Keselamatan, Kesehatan Kerja dan Produktivitas [Internet]. 2016. 383 p.

Tarwaka, K. (2014). Kesehatan Kerja Manajemen dan Implementasi K3 di Tempat Kerja. HarapanPress, Surakarta

Downloads

Additional Files

Published

2024-07-31

How to Cite

Ayu, B. F., Kardi, K., & Wanda, J. (2024). The Relationship between Drinking Water Consumption, Nutritional Status and Workload with The Incidence of Heat Strain in Tofu-Making Workers in West Kekalik Sub-District. Hydrogen: Jurnal Kependidikan Kimia, 12(3), 663–674. https://doi.org/10.33394/hjkk.v12i3.12373

Issue

Vol. 12 No. 3 (2024): June-July 2024

Section

Articles

Citation Check

License

License and Publishing Agreement
In submitting the manuscript to the journal, the authors certify that:

  1. They are authorized by their co-authors to enter into these arrangements.
  2. The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
  3. That it is not under consideration for publication elsewhere,
  4. That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
  5. They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
  6. They agree to the following license and publishing agreement.

Copyright
Authors who publish with Hydrogen: Jurnal Kependidikan Kimia agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

Licensing for Data Publication

Hydrogen: Jurnal Kependidikan Kimia uses a variety of waivers and licenses, that are specifically designed for and appropriate for the treatment of data: Open Data Commons Attribution License, http://www.opendatacommons.org/licenses/by/1.0/ (default) Other data publishing licenses may be allowed as exceptions (subject to approval by the editor on a case-by-case basis) and should be justified with a written statement from the author, which will be published with the article.