Teacher Commitment and Learning Quality : Encouraging Teaching Factory at Bekasi Islamic Private Vocational School
DOI:
https://doi.org/10.33394/jk.v10i3.12683Keywords:
Commitment, Learning Quality, Teacher, Teaching Factory.Abstract
The aim of this research is to analyze the description of educators' dedication to the quality of education through use of teaching factories as a way to close the competency gap required by the industrial sector to study at private Islamic vocational schools in Bekasi Regency. The research method used a qualitative descriptive with three-stream analysis of data reduction, data presentation and drawing conclusions from the results of observations and in-depth interviews with participants including school principals and teachers as heads of the teaching factory program and the Bekasi District Education Office as supervisors of the implementation of the teaching factory program. A tree diagram used to explain the structured flow of the results of observations and in-depth interviews. The findings showed that the dedication of teaching staff at the Bekasi Regency Islamic Private Vocational School in achieving the learning quality of the teaching factory program was still very low. Where it is necessary to encourage school principals and related agencies to be able to innovate learning facilities that are relevant to the industrial world at the same level. Encouragement of compensation and opportunities at the next level of education. Efforts to encourage the teaching factory program to emphasize the importance of learning facilities in schools as a means of industrial practice in the classroom. Other efforts include the rights and obligations in building teacher dedication to achieve competent.
References
Afandi, A., & dkk. (2022). Metodologi Pengabdian Masyarakat ( dkk Suwendi (ed.); Pertama). Direktorat Pendidikan Tinggi Keagamaan Islam.
Agus Setiawan, R. A. H. (2021). Innovation in the New Model of Vocational Professional Teacher Education According to the Demands of the Industrial Revolution 4.0. Proceedings of the 6th UPI International Conference on TVET 2020 (TVET 2020), 272–275. https://doi.org/https://doi.org/10.2991/assehr.k.210203.132
Agustriawan, B. (2023). Strategi Kepala Sekolah Dalam Meningkatkan Mutu Pembelajaran Pendidikan Inklusif di SDN Airlangga 1/198 Surabaya. Jurnal Inspirasi Manajemen Pendidikan, Vol 11(No 1), 1–14.
Amanaturrohim, H. (2016). Pengaruh pendapatan dan konsumsi rumah tangga terhadap kesejahteraan keluarga petani penggarap kopi di Kecamatan Candiroto Kabupaten Temanggung. Economic Education Analysis Journal, Jurusan Pendidikan Ekonomi, Fakultas Ekonomi, Universitas Negeri Semarang, Indonesia, 5(Vol. 5 No 2 2016), 12.
Amiruddin, F., & at.al. (2023). Efektifitas Pembelajaran Teaching Factory Pada Teknik Pemesinan Untuk Siswa SMK. Jurnal Pendidikan Teknik Mesin UNESA, Vol 12(No 1), 52–58. https://doi.org/https://doi.org/10.26740/jptm.v12n1.p52-58
Arie Wibowo Khurniawan, & Dkk. (2021). grand design pengembangan teaching factory dan technopark di smk. Içinde Tri Haryani (Ed.), Panduan (Panduan, s. 202). Kemendikbudristek.
Arifah, S., & at.all. (2016). Pengembangan Sumber Daya Manusia di Lembaga Organisasi Pelayanan Sosial (Studi Kasus Mengenai Pelatihan Karyawan di Aksi Cepat Tanggap Jakarta Selatan). Içinde Arie Surya Gustama (Ed.), Nasional (ss. 395–399). IPI Unpad.
Asih Kuswardinah. (2019). Ilmu Kesejahteraan Keluarga (Hadi Waluyo (ed.); Cetakan ke). UNNES PRESS.
Biro Pusat Statistik. (2022). Indikator Keluarga Kesejahteraan Rakyat 2022 (BPs (ed.); Tahun 2022). BPS.
Bukit, B. (2017). Pengembangan Sumber Daya Manusia, Teori, Dimensi Pengukuran, dan Implementasi dalam Organisasi (B. Bukit (ed.); Pertama). Zahir Publishing.
Cansoy, R., Parlar, H., Polatcan, M., & et.al. (2022). Collective teacher efficacy as a mediator in the relationship between instructional leadership and teacher commitment. International Journal of Leadership in Education, Vol 25(No 7), 1–15. https://doi.org/https://doi.org/10.1080/13603124.2019.1708470
Cheng Qihong. (2020). Research on Construction of Flexible Teacher Management Mechanism in Secondary Vocational Schools and Path Innovation. Journal Theory and Practice of Innovation and Enntrepreneurship, Vol 3(No 10), 176–177.
Cheryl A. Kier and Cindy Ives. (2022). Recommendations for a balanced approach to supporting academic integrity: perspectives from a survey of students, faculty, and tutors. International Journal for Educational Integrity, Vol 18(No 22), 1–19. https://doi.org/https://doi.org/10.1007/s40979-022-00116-x
Christos Manettas, Xanthi Bampoula, Nikolaos Nikolakis, K. A., & et.al. (2023). A Hybrid Teaching Factory and Asynchronous Learning Method for Improving the Digital Skills of Manufacturing Workforce: The Predictive Maintenance Case. Educational Technology, Media & Library Science eJournal, Vol 21(No 1), 1–6.
Efendi, N., & at.all. (2023). Manajemen Pendidikan Dalam Meningkatkan Mutu Pembelajaran. Academicus: Journal of Teaching and Learning, Vol 2(No 2), 68–85. https://doi.org/https://doi.org/10.59373/academicus.v2i2.25
Eginli, I. (2021). In search of keeping good teachers: Mediators of teacher commitment to the profession. Journal of Language and Linguistic Studies, Vol 17(No S2), 911–936.
Fattah, F. A., & at.al. (2020). Pembelajaran Teaching Factory Untuk Menghasilkan Lulusan SMK Yang Sesuai Dengan Dunia Usaha dan Dunia Industri. Içinde Trisno Martono (Ed.), Prosiding Seminar Nasional (ss. 66–72). Malang: Ahlimedia Press.
Jamin, D. (2021). Kompetensi yang Diharapkan DUDIKA untuk Lulusan SMK. Içinde indonews (Pertama, ss. 1–2). indonews.
PMK Nomor 49 Tahun 2023, Pub. L. No. PMK Nomor 49 Tahun 2023, 134 (2023).
Khoo, E., Zegwaard, K., & Adam, & A. (2020). Employer and academic staff perceptions of science and engineering graduate competencies. Australasian Journal of Engineering Education, Vol 25(No 1). https://doi.org/https://doi.org/10.1080/22054952.2020.1801238
Khurniawan, A. W. (2015). Grand Design Pengembangan Teaching Factory dan Technopark di SMK (Tri Haryani (ed.); Pertama). Direktorat Pembinaan Sekolah Menengah Kejuruan.
Kinyó, S. H. M. and L. (2022). The cross-cultural validation of the technology-enhanced social constructivist learning environment questionnaire in the Iraqi Kurdistan Region. Journal Research and Practice in Technology Enhanced Learning (RPTEL), Vol 17(No 25), 1–25. https://doi.org/https://doi.org/10.1186/s41039-022-00199-7
Lubis, J., & dkk. (2019). Komitmen Membangun Pendidikan (Tinjauan Krisis Hingga Perbaikan Menurut Teori) (M. P. Dr. Indra Jaya (ed.); Cetakan Pe). CV. Widya Puspita.
Lumbanrau, R. E. (2021). Kasus Hervina dan nestapa kehidupan guru honorer: “Dilema antara gaji rendah, pengabdian tanpa kepastian dan cinta pekerjaanâ€. BBC News Indonesia, 6.
Manalu, S. R. I., & at.al. (2017). Tatakelola Pelaksanaan Teaching Factory (Panduan (ed.); Tri Haryan). Direktorat Pembinaan Sekolah Menengah Kejuruan.
Miles & Huberman. (2014). Qualitative Data Analysis: A Methods Sourcebook (H. Salmon (ed.); Third Edit). SAGE Publications, Inc.
Mohamad, R., & at.al. (2016). Komitmen Guru dan Kepuasan Kinerja Guru di Sekolah Menengah Harian Berprestasi Tinggi dan Berprestasi Rendah Daerah Kota Bharu, Kelantan. Proceeding of ICECRS, 1 (2016) 863-874, 863–874. https://doi.org/http://dx.doi.org/10.21070/picecrs.v1i1.603
Mourtzis, D., & at.al. (2022a). A hybrid teaching factory model towards personalized education 4.0. International Journal of Computer Integrated Manufacturing, Vol 36(No 12), 1739–1759. https://doi.org/https://doi.org/10.1080/0951192X.2022.2145025
Mourtzis, D., & at.al. (2022b). Blockchain in Engineering Education: the Teaching Factory Paradigm. Içinde Nikos Panopoulos (Ed.), Internasional Proceding (ss. 1–6). 11th Conference on Learning Factories, CLF2021.
Mustaghfiroh, & at.al. (2020). Upaya Peningkatan Komitmen Kerja Guru Bidang Studi (Studi Kasus di SMK Riyadlul Quran Kabupaten Malang). Jurnal Dinamika Manajemen Pendidikan, Vol 5(No 1), 13–19. https://doi.org/https://doi.org/10.26740/jdmp.v5n1.p22-28
Ndwandwe, K. P., & et.al. (2024). Smartboard enhanced creativity in the technology classroom: lessons on mechanical systems and control. Jurnal Pendidikan Teknologi Kejuruan, Vol 30(No 1), 145–156. https://doi.org/https://doi.org/10.21831/jptk.v30i1.72289
Nugraha, D. W. (2024). SMK dan Industri Tak Kunjung Selaras, 1,6 Juta Lulusan Menganggur.
PP Nomor 34, Pub. L. No. PP Nomor 34, 1378 (2018).
Permendikbud No 5, Pub. L. No. Permendikbud No 5, 16 (2022).
PP No 14 Tahun, Pub. L. No. 41 Tahun 2015, 40 (2015).
Purba Wahyu Adi, Trisno Martono, S., & et.al. (2021). Pemicu Kegagalan Pada Pembelajaran Di Sekolah Selama Pandemi Di Indonesia (Suatu Studi Pustaka). Journal RDJE: Research and Development Journal of Education, Vol 7(No 2). https://doi.org/https://journal.lppmunindra.ac.id/index.php/RDJE/article/view/10568
Raco, . J. R. (2018). Metode Penelitian Kualitatif Jenis, Karakteristik, dan Keunggulannya (Prof. Dr. Conny R. Semiawan (ed.); Kedua). Kompas Gramedia.
Rahmadhany Diah Ayu Runi, P. L. D. (2019). Industry in Supporting the Quality Management of Vocational School Through Blended Learning. Proceedings of the International Conference on Online and Blended Learning 2019 (ICOBL 2019), 111–113. https://doi.org/https://doi.org/10.2991/assehr.k.200521.023
Rahman Setia, D. N., & et.al. (2020). School management: The optimization of learning facilities to improve the quality of vocational schools. Jurnal Pendidikan Vokasi, Vol 10(No 2), 150–158. https://doi.org/http://dx.doi.org/10.21831/jpv.v10i2.29981
Rianto, P. (2020). Penelitian Kualitatif dan Desain Riset: Memilih Di Antara Lima Pendekatan (A. Pambudi W (ed.); Pertama). Penerbit Komunikasi UII.
Robby Anzil Firdaus, Dian Purnamasari, Stefy Falentino Akuba, A. P., & et.al. (2020). Leadership and Perceived Workload Moderating Effect on Teacher Commitment in Islamic School. Shodhshauryam, International Scientific Refereed Research Journa, Vol 3(No 1), 81–87.
Rohmah, W., & at.al. (2021). Pola Pembelajaran Akuntansi Sekolah Menengah Kejuruan Dengan Mengadopsi Teaching Factory. Jurnal Pendidikan Ilmu Sosial, Vol 31(No 2), 74–81. https://doi.org/https://doi.org/10.23917/jpis.v31i2.15395
Savitri, A. S., & at.all. (2022). Peran Strategi Pembelajaran Terhadap Motivasi Belajar Siswa. Jurnal Pendidikan Sosiologi dan Humaniora, Vol 13(No 2), 505–511. https://doi.org/https://dx.doi.org/10.26418/j-psh.v13i2.54825
Schokin, Rostislav Heorhiyovych, Radkevych, V. O, Borodiyenko, Oleksandra, Romanenko, Yevhen O., Datsii, Oleksandr Ivanovych, Miroshnychenko, Oleksii Valentynovych, Kolyshko, Rodion Anatoliyovych, and Prytomanov, S. O., & et.al. (2023). The concept of management of the development of vocational education. Journal School of Electronics and Computer Science at the University of Southampton, Vol 24(No 2), 228–244. https://doi.org/https://doi.org/10.32689/2617-2224- 2020-3(23)-228-244
Sirajjuddin. (2017). Analisis data kualitatif (Hamzah Upu (ed.); Cetakan 1). Penerbit Pustaka Ramadhan, Bandung.
Stavropoulos, P., & at.al. (2022). A Teaching Factory on Context-aware Design of Automation for Sustainable Manufacturing Processes. Journal SSRN, Vol 32(No 12), 1–6.
Sudiyono. (2019). Teaching Factory As An Effort To Improve The Quality Of Gradduates In Vocatipbal Shcool. Jurnal Penelitian Kebijakan Pendidikan, Vol 12(No 2), 159–181.
Suwandi. (2012). Faktor-Faktor Yang Mempengaruhi Penghasilan Guru di Era Desentralisasi Pendidikan. JURNAL ECONOMINA, Vol 8(No 2). https://doi.org/http://dx.doi.org/10.21831/economia.v8i2.1224
Sya’bani, M. A. Y. (2017). Upaya Meningkatkan Kearifan Menyatakan Pendapat Mahasiswa Pendidikan Agama Islam Melalui Focus Group Diskussion(FGD) Dalam Mata Kuliah Profesi Keguruan (Studi Kasus Implementasi Program Lesson Studypada Mahasiswa Pendidikan Agama Islam Fakultas Agama Isla. Tamaddun : Jurnal Pendidikan dan Pemikiran Keagamaan, Vol 4(No 2), 1–20. https://doi.org/http://dx.doi.org/10.30587/tamaddun.v0i0.69
Tahar, A., & at.all. (2022). Strategi Pengembangan Sumber Daya Manusia dalam Menghadapi Era Revolusi Industri 4.0 Menuju Era Society 5.0. Jurnal Pendidikan Tambusai, Vol 6(No 2), 12380–12394. https://doi.org/https://doi.org/10.31004/jptam.v6i2.4428
Tavip, H., & at.all. (2023). Penguatan Keterampilan Partisipasi sebagai Civic Skills Siswa Melalui Latihan Dasar Kepemimpinan di SMA Muhammadiyah 1 Karanganyar. Jurnal Kewarganegaraan, Vol 20(No 2), 99–119. https://doi.org/https://doi.org/10.24114/jk.v20i2.44977
Waluyo, B. (2022). Manajemen Upaya Peningkatan Komitmen Kerja Guru. Jurnal An-Nur, Vol 8(No 1), 1–9.
Xingping Yu. (2021). Computer Teacher Teaching Innovation Team Construction in Higher Vocational Education under the Background of 1+X Certificate System. Journal Icimtech 21, Vol 4(No 1), 1–4. https://doi.org/https://doi.org/10.1145/3465631.3465800
Boan, 2023, https://koranbernas.id/belajar-ke-bekasi-stigma-smk-penumbang-pengurusran-besar-dipapahkan, “Kami juga membekali mahasiswa dengan praktik dan bermitra dengan banyak perusahaan.â€
https://indonews.id/artikel/321150/Kompetensi-yang-Diharapkan-DUDIKA-untuk-Lulusan-SMK/
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
License and Publishing AgreementIn submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere,
- That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and publishing agreement.
Authors who publish with JK agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.Â
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- Open Data Commons Attribution License, http://www.opendatacommons.org/licenses/by/1.0/ (default)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
