Analisis Kandungan Mineral Tembaga (Cu) yang Terdapat pada Struktur Batu Tambang Dengan Metode Atomic Absorption Spectrofotometer (AAS)

Authors

  • Imam Bukhari Program Studi Pendidikan Fisika, FPMIPA IKIP Mataram, Indonesia
  • Susru Hiyatun Hayati Program Studi Pendidikan Kimia, FPMIPA, IKIP Mataram, Indonesia
  • Nisa Humayroh Program Studi Pendidikan Biologi, FPMIPA, IKIP Mataram, Indonesia
  • Sukainil Ahzan Program Studi Pendidikan Fisika, FPMIPA, IKIP Mataram, Indonesia
  • Dwi Sabda Budi Prasetya Program Studi Pendidikan Fisika, FPMIPA, IKIP Mataram, Indonesia

DOI:

https://doi.org/10.33394/j-lkf.v6i2.1143

Keywords:

Rab shells, Chitosan, AAS

Abstract

[Title: Analysis of Copper (Cu) Mineral Content in the Mining Rock Structure using the Atomic Absorption Spectrophotometer (AAS) Method]. This research was conducted with the aim of: 1) Making chitosan based on local crab shells NTB, 2) Test the absorption of Au ions using chitosan with AAS. This research was carried out using the AAS method, namely by making chitosan from crab shells, Au stock solution which was prepared in the first stage was given chitosan powder and carried out absorption with varying times. Analysis of gold content in Au stocks that have been treated with AAS to determine the remaining Au content and Au absorbed.

References

Asni, N., M. Saadilah, Saleh, (2014). Optimalisasi Sintesis Kitosan Dari Cangkang Kepiting Sebagai Adsorben Logam Berat Pb (II),Spektra: Jurnal Fisika dan Aplikasinya, Vol. 15 No. 1

Elsabee, M.Z., Naguib, H.F., Morsi, R.E., (2012). Kitosan based nanofibers review. Materials Science and Engineering: C 32, 1711–1726.

Erdawati. (2008). Kapasitas Adsorpsi Kitosan dan Nanomagnetik Kitosan terhadap Ion Ni(II). Prosiding Seminar Nasional Sains dan Teknologi-II 2008: Universitas Negeri Jakarta.

Harniangsih, (2010). Pemanfaatan Limbah Cangkang Kepiting menjadi Kitosan sebagai Bahan pelapis pada Buah Stoberi. Jurnal Teknik Kimia No. 1 2010, Hal: 7-12.

Kurniasih, Y., Ahmadi, Sabda, BP., (2016), Pembuatan Kitosan dari Cangkang Udang dan Aplikasinya sebagai Absorben untuk Menurunkan Kadar Logam Cu, Proseding Seminar Nasional PKPSM, IKIP Mataram.

Nasir, M., Adlim, Khaldun, I., Ali, M. Z., (2012), Chitosan-Amin Use for Recovery Gold from Waste Treatment Gold, Jurnal Ilmiah Pendidikan Biologi, Biologi Edukasi Vol 4, Nomor 2, hlm 95-99

Setiawan, Dian Aris, et al. (2015). Pengaruh Konsentrasi dan Preparasi MembranTerhadap Karakterisasi Membran Kitosan. Jurnal Keteknikan pertanian tropis dan Biosistem. Vol. 3 No. 1, Februari 2015, 95-99.

Rahayu, L. H, et al. (2007). Optimasi Pembuatan Kitosan dariKitin Limbah Cangkang Rajungan (Portunus pelagicus) untuk Adsorben Ion Logam Merkuri.Jurnal Reaktor, Vol. 11, No.1, Juni 2007, Hal.:45- 49.

Sanjaya, Indah, et al. (2007). Adsorpsi Pb(II) oleh Kitosan Hasil Isolasi Kitin Cangkang Kepiting Bakau (Scylla). Jurnal Ilmu Dasar Vol. 8 No.1 2007: 30-36.

Wardaniati, Ratna Adi, dkk. (2008). Pembuatan Kitosan dari Kulit Udang dan Aplikasinya sebagai Pengawet Bakso. Jurnal. UNDIP.

Downloads

Published

2018-12-31

How to Cite

Bukhari, I., Hayati, S. H., Humayroh, N., Ahzan, S., & Prasetya, D. S. B. (2018). Analisis Kandungan Mineral Tembaga (Cu) yang Terdapat pada Struktur Batu Tambang Dengan Metode Atomic Absorption Spectrofotometer (AAS). Lensa: Jurnal Kependidikan Fisika, 6(2), 50–53. https://doi.org/10.33394/j-lkf.v6i2.1143

Issue

Vol. 6 No. 2: December 2018

Section

Articles

Citation Check

License

Authors who publish with Lensa: Jurnal Kependidikan Fisika agree to the following terms:

  1. For all articles published in Lensa: Jurnal Kependidikan Fisika, copyright is retained by the authors. Authors give permission to the publisher to announce the work with conditions. When the manuscript is accepted for publication, the authors agree to automatic transfer of the publishing right to the publisher.
  2. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.