PENGARUH PERUBAHAN SUHU TERHADAP UJI IMPAK LAPISAN NIKEL-KROM PADA SUBSTRAT TEMBAGA

Authors

  • Sukainil Ahzan Dosen Program Studi Pendidikan Fisika, FPMIPA IKIP Mataram, Indonesia
  • Ahmadi Ahmadi Dosen Program Studi Pendidikan Kimia, FPMIPA IKIP Mataram, Indonesia

DOI:

https://doi.org/10.33394/j-lkf.v3i2.387

Keywords:

Electroplating, Nickel, impact test.

Abstract

It has been done plating a copper with process electroplating technique using a solution of nickel and chrome. The purpose of this study to find the best strength of the layer with the optimal flow. The strength of the material in the test with the impact test on a sample of coated copper at different work flows (1A, 1.5 A, 2.0 A, and 2.5 A). The results of the impact energy impact test obtained for each flow which is 2.1566 J / mm2; 2.3017 J / mm2; 1.9319 J / mm2; 1.9205 J / mm2. From the analysis concluded layer with high impact strength at an operating current of 1.5 A

References

Budi Suhendro, 2011. Rancang bangun dan analisis alat pelapisan tembaga menggunakan teknik elektroplating.Seminar Nasional SDM Teknologi Nuklir VII ISSN1978-0176.

Setyowati, 2012. Pengaruh Rapat Arus Terhadap Ketebalan Dan Struktur Kristal Lapisan Nikel pada Tembaga. Indonesian Journal of Applied Physics (2012) Vol.2 No.1 halaman 1. ISSN:2089 – 0133.

Suarsana, 2008. Pengaruh Waktu Pelapisan Nikel pada Tembaga dalam Pelapisan Khrom Dekoratif terhadap Tingkat Kecerahan dan Ketebalan Lapisan. Jurnal Ilmiah Teknik Mesin Cakram Vol. 2 No. 1, Juni 2008 (48 –60).

Widodo & Asmoro, 2012. Analisa Chrome Deposit dan Hardness pada Proses Hard Chrome dengan Variasi Arus untuk Roda Gigi Sepeda Motor. Jurnal Teknologi Technoscientia. ISSN: 1979-8415 Vol. 4 No. 2 Februari.

Downloads

Published

2015-12-25

How to Cite

Ahzan, S., & Ahmadi, A. (2015). PENGARUH PERUBAHAN SUHU TERHADAP UJI IMPAK LAPISAN NIKEL-KROM PADA SUBSTRAT TEMBAGA. Lensa: Jurnal Kependidikan Fisika, 3(2), 304–306. https://doi.org/10.33394/j-lkf.v3i2.387

Issue

Vol. 3 No. 2: December 2015

Section

Articles

Citation Check

License

Authors who publish with Lensa: Jurnal Kependidikan Fisika agree to the following terms:

  1. For all articles published in Lensa: Jurnal Kependidikan Fisika, copyright is retained by the authors. Authors give permission to the publisher to announce the work with conditions. When the manuscript is accepted for publication, the authors agree to automatic transfer of the publishing right to the publisher.
  2. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.