PEMBUATAN BATA RINGAN BERBAHAN DASAR LIMBAH PENGOLAHAN EMAS TRADISIONAL DI PROPINSI NTB
DOI:
https://doi.org/10.33394/j-lkf.v4i2.98Keywords:
Bata ringan, limbahpengolahanemas, NTB, kuattekanAbstract
Research on the manufacture of lightweight brick with basic material waste processing of goldin the province of West Nusa Tenggara has been done. This research is very important because most of the people in NTB separate gold by amalgamation and cyanidation methods. Processes that do this will result in hazardous waste on the environment so that the need for countermeasures. The purpose of this research is to create a lightweight bricks made of waste processing of gold which has a strong press that meets national standards. This research was conducted through two stages, namely 1) Stage of light brick making, 2) Phase compressive strength test light brick production. The results showed that lightweight bricks made with waste raw gold processing and cement with a ratio of 3: 1 has a compressive strength of 7.80 kg / cm2. These results demonstrate compliance with national standards, namely 7.83 kg / cm2 so that the product of this research can be said to be feasible.
References
Anilaputri, E., Yonatha, A. (2009). PerbandinganSisa Material antaraDinding Bata KonvensionaldenganDinding Bata RinganpadaProyekPerumahan.(TugasAkhir No.21011669/SIP/2009.)Unpublished Undergraduate Thesis. Universitas Kristen Petra. Surabaya.
A Short & W. Kinniburgh. Lightweight Concrete. (1978). Applied Science Publishers Ltd. AAC Manufacturing. (2011). Retrieved September 04, 2012, from http://www.aerblock.com/history.html
EnsiklopediNasional Indonesia. (1997). Batu Bata. PT. Delta Pamungkas. Jakarta
Goritman, B. dkk., 2015, StudiKasusPerbandinganBerbagai Bata Ringan Dari SegiMaterial, Biaya, Dan Produktivitas
Kristanti, N., Tansajaya, A. (2008). StudiPembuatan Cellular Lightweight Concrete (CLC) denganMenggunakanBeberapa Foaming Agent. TugasAkhir No. 11011592/SIP/2008. Unpublished Undergraduate Thesis. Universitas Kristen Petra. Surabaya
Sabda, D.,B,P., Pangga,D., 2015, IdentifikasiKandungan Material padaLimbahPenambanganEmas di Sekotong, Seminar Nasional,, UniversitasMataram.
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
Authors who publish with Lensa: Jurnal Kependidikan Fisika agree to the following terms:
- For all articles published in Lensa: Jurnal Kependidikan Fisika, copyright is retained by the authors. Authors give permission to the publisher to announce the work with conditions. When the manuscript is accepted for publication, the authors agree to automatic transfer of the publishing right to the publisher.
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
.png)
