Work Safety Risk Analysis Using Hazard And Operability Study (Hazop) And Job Safety Analysis (Jsa) Methods In Cv. Xyz

Authors

  • Alivia Putri Trisnayanti Industrial Engineering, Fakulty of Engineering, Universitas Widyatama
  • Yani Iriani Industrial Engineering, Fakulty of Engineering, Universitas Widyatama

DOI:

https://doi.org/10.33394/j-ps.v11i1.6593

Keywords:

Hazard, HAZOP, JSA, Work accident

Abstract

CV XYZ is a company engaged in the production of fashion. The problem that occurs in CV XYZ is that there are still several cases of work accidents caused by the attitude of workers, the work environment and the tools used during the production process. The purpose of this study is to analyze the potential hazards and the causes of potential hazards, the risk of injury and even work accidents and provide suggestions for improvements to reduce the risk of work accidents so that control and prevention of hazards that arise in the work area can be carried out. The methods used in this research are Hazard and Operability Study (HAZOP) and Job Safety Analysis (JSA). Hazard and Operability Study (HAZOP) is a hazard identification approach in working environment conditions, existing facilities, equipment operation and overall production. Hazop looks for possible causes of accidents and determines the consequences of deviations that occur when a job is done. Job Safety Analysis (JSA) is the identification of hazards by taking into account unsafe act and unsafe conditions. This hazard identification method is carried out by studying a job to identify hazards and potential incidents associated with each step and used to find solutions and control existing hazards. Based on the results of data processing, it is known that the sources of hazards that exist or have the potential for work accidents are the attitudes of workers and the physical work environment and it is known that there are 30 identified hazards from 16 routine activities and 7 of them have the highest risk of intensity in causing hazards in the work area.

References

Balili, S., & Yuamita, F. (2022). Analisis Pengendalian Risiko Kecelakaan Kerja Bagian Mekanik Pada Proyek PLTU Ampana (2x3 MW) Menggunakan Metode Job Safety Analysis (JSA). Jurnal Teknologi Dan Manajemen Industri Terapan, 1(II), 61–69.

Budiman, M. R., Suseno, A., & Wahyudin, W. (2022). Identifikasi Potensi Bahaya untuk Meminimalkan Kecelakaan Kerja dengan Metode Hazard and Operability Study (HAZOP) di PT SEGARA. Jurnal Ilmiah Wahana Pendidikan, 8(9), 333–339.

Farid, M., & Anggraini, W. C. (2021). Analisis Keselamatan Dan Kesehatan Kerja (K3) Menggunakan Metode Hazard And Operability (Studi Kasus. Pt Igasar). Jurnal Teknologi Dan Sistem Informasi Bisnis-JTEKSIS, 3(1), 223–227.

Ikhsan, M. Z. (2022). Identifikasi Bahaya, Risiko Kecelakaan Kerja Dan Usulan Perbaikan Menggunakan Metode Job Safety Analysis (JSA). Jurnal Teknologi Dan Manajemen Industri Terapan, 1(I), 42–52.

Marasabessy, R. S., Hanaulu, A. K., & Latuconsina, M. (2020). Analisis Risiko Kecelakaan Kerja Menggunakan Metode Hazard And Operability Study (HAZOP) Pada Proyek Kontruksi Drainase. PROFICIENSI: The Journal of the Industrial Engineering Study Program, 8(2), 134–142.

Mikael Wendy Tulak, W. (2021). Studi Hasil Analisis Risiko Pekerjaan pada Bagian Sarana dan Prasarana (SAPRAS) Di Institut Teknologi Kalimantan dengan Menggunakan Metode Job Safety Analysis (JSA). Institut Teknologi Kalimantan.

Mindhayani, I. (2020). Analisis risiko keselamatan dan kesehatan kerja dengan metode HAZOP dan pendekatan ergonomi (Studi kasus: Ud. Barokah Bantul). Simetris: Jurnal Teknik Mesin, Elektro Dan Ilmu Komputer, 11(1), 31–38.

Nabilla, P. (2021). Analisis Penerapan Keselamatan Dan Kesehatan Kerja (K3) Pada Pekerjaan Hot Tapping Steam Pipe Line (Studi Kasus: Departemen Asia Pasific Rayon PT.RAPP). UIN SULTAN SYARIF KASIM RIAU.

Ningsih, S. O. D., & Hati, S. W. (2019). Analisis Resiko Keselamatan Dan Kesehatan Kerja (K3) Dengan Menggunakan Metode Hazard and Operability Study (Hazop) Pada Bagian Hydrotest Manual Di Pt. Cladtek Bi Metal Manufacturing. Journal of Applied Business Administration, 3(1), 29–39.

Pradaka, M. (2021). Analisis Resiko Keselamatan Dan Kesehatan Kerja (K3) Dengan Menggunakan Metode Hazard And Operability Study (Hazop) Pada Department Produksi Iii B Pt. Petrokimia Gresik.

Pusparina, D. (2022). Analisis Kecelakaan Kerja Dengan Menggunakan Metode Hazop (Hazard And Operability Study), What If/Checklist Dan Jsa (Job Safety Analysis) Pada PT XYZ. Universitas Pembangunan Nasional Veteran Jakarta.

Ramisdar, I. O., Ibrahim, H., Mallapiang, F., & Lagu, A. M. H. R. (2020). Potential Hazards in the Loading and Unloading Process: Risk Analysis with Job Safety Analysis and Hazard Operability Study Methods. Diversity: Disease Preventive of Research Integrity, 1–7.

Restuputri, D. P., & Sari, R. P. D. (2015). Analisis kecelakaan kerja dengan menggunakan metode Hazard and Operability Study (HAZOP). Jurnal Ilmiah Teknik Industri, 14(1), 24–35.

Retnowati, D. (2017). Analisa Risiko K3 Dengan Pendekatan Hazard and Operability Study (Hazop). Teknika: Engineering and Sains Journal, 1(1), 41–46.

Sukapto, P., Djojosubroto, H., & Permana, H. (2018). Penerapan Metode Job Safety Analysis and Risk Score untuk Meningkatkan Keselamatan dan Kesehatan Kerja pada Departemen Printing, Sewing dan Assembly PT. PAI, Bandung (Suatu Pendekatan Participatory Ergonomic). Jurnal Kesehatan, 9(3), 403–411.

Downloads

Published

2023-01-26

How to Cite

Trisnayanti, A. P., & Iriani, Y. (2023). Work Safety Risk Analysis Using Hazard And Operability Study (Hazop) And Job Safety Analysis (Jsa) Methods In Cv. Xyz. Prisma Sains : Jurnal Pengkajian Ilmu Dan Pembelajaran Matematika Dan IPA IKIP Mataram, 11(1), 111–123. https://doi.org/10.33394/j-ps.v11i1.6593

Issue

Vol. 11 No. 1: January 2023

Section

Research Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

 Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.