Development of STEM-Based E-Modules on Colloid Material to Train Scientific Literacy Skills

Authors

DOI:

https://doi.org/10.33394/jtp.v8i3.7614

Keywords:

E-module, STEM, Colloidal, Scientific Literacy

Abstract

The causes of low literacy in Indonesia are influenced by several factors including teaching materials that are not under the development of students, teacher-centered learning, and low levels of reading ability. This research was conducted to determine the differences in teaching materials used in schools and STEM-based e-modules that were developed and to see the level of feasibility and practicality of STEM-based e-modules. This research used to research and development (R&D) methods by adopting the borg and gall model consisting of over seven stages namely, research and data collection, planning, development, product validation, product revision, field trial, and final product. based on the results of STEM-based e-module validation on colloidal material, the percentage of media and material experts was 89.6% and 90.6%. The practicality of the teacher obtained a percentage of 89%. Based on the validation results of media experts, material experts, and teacher practicality, it was found that STEM-based e-modules were declared feasible and practical to use in the learning process. Based on the results of an analysis of differences in teaching materials in schools and the developed e-modules, it was stated that they were different both in terms of the format and the learning model used.

References

Andaresta, N., & Rachmadiarti, F. (2021). Pengembangan E-Book Berbasis STEM Pada Materi Ekosistem Untuk Melatihkan Kemampuan Literasi Sains Siswa [Development of STEM-Based E-Books on Ecosystem Materials to Practice Students’ Scientific Literacy

Skills]. BioEdu, 10(1), 635–646.

Andari, I. (2019). Pentingnya Media Pembelajaran Berbasis Video Untuk Siswa Jurusan IPS Tingkat SMA Se-Banten. Jurnal Pendidikan, 2(1), 263–275.

Asmiyunda, A., Guspatni, G., & Azra, F. (2018). Pengembangan E-Modul Kesetimbangan Kimia Berbasis Pendekatan Saintifik untuk Kelas XI SMA/ MA. Jurnal Eksakta Pendidikan (Jep), 2(2), 155. https://doi.org/10.24036/jep/vol2-iss2/202

Dalimunthe, S. K., & Simorangkir, M. (n.d.). Developing Problem-Based E-Module Using Moodle In Solubility And Solubility Product Constant Learning Material For High School. https://doi.org/10.4108/eai.20-9-2022.2324694

Dhia Octariani, A. C. P. (2020). Jurnal Pendidikan Matematika dan Sains Jurnal Pendidikan Matematika dan Sains. ASIMETRIS: Jurnal Pendidikan Matematika Dan Sains, 1(2),

–49.

Fuadi, H., Robbia, A. Z., Jamaluddin, J., & Jufri, A. W. (2020). Analisis Faktor Penyebab Rendahnya Kemampuan Literasi Sains Peserta Didik. Jurnal Ilmiah Profesi Pendidikan,5(2), 108–116. https://doi.org/10.29303/jipp.v5i2.122

Herawati, N. S., & Muhtadi, A. (2018). Pengembangan modul elektronik (e-modul) interaktif pada mata pelajaran Kimia kelas XI SMA. Jurnal Inovasi Teknologi Pendidikan, 5(2), 180–191. https://doi.org/10.21831/jitp.v5i2.15424

Imansari, N., & Sunaryantiningsih, I. (2017). Pengaruh Penggunaan E-Modul Interaktif Terhadap Hasil Belajar Mahasiswa pada Materi Kesehatan dan Keselamatan Kerja. VOLT : Jurnal Ilmiah Pendidikan Teknik Elektro, 2(1), 11. https://doi.org/10.30870/volt.v2i1.1478

Irman, S., & Waskito, W. (2020). Validasi Modul Berbasis Project Based Learning pada Mata Pelajaran Simulasi dan Komunikasi Digital. Jurnal Ilmiah Pendidikan Dan Pembelajaran, 4(2), 260–269.

Jamilah, M., & Silaban, R. (n.d.). The Innovation of STEM-PjBL-based Chemistry PracticumGuide to Improve Science Process Skills and Learning Outcomes of Class XI Students. https://doi.org/10.4108/eai.20-9-2022.2324592

Muchtar, Z., Rahmah, S., Harahap, F., Kurniawan, C., Ulfa, N., Hasniyah, F., Chaniago, F. A., Fadhillah, M., Sihombing, J. L., Sari, S. A., & Zubir, M. (2022). Pengembangan Praktikum Kimia Dasar berbasis Video pada Materi Sistem Periodik Unsur. Edukimia, 4(1), 010–017. https://doi.org/10.24036/ekj.v4.i1.a325

Narut, Y. F., & Supradi, K. (2019). Literasi Sains Peserta Didik Dalam Pembelajaran IPA di Indonesia. Jurnal Inovasi Pendidikan Dasar, 3(1), 61–69.

Nurdyansyah, & Mutala’liah, N. (2015). Pengembangan Bahan Ajar Modul Ilmu Pengetahuan Alambagi Siswa Kelas IV Sekolah Dasar. Program Studi Pendidikan Guru Madrasa Ibtida’iyah Fakultas Agama Islam Universitas Muhammadiyah Sidoarjo, 41(20), 1–15.

Nurhayati, E., Andayani, Y., Hakim, A., Mataram, U., Studi, P., Kimia, P., Mataram, U., Barat, N. T., & Semmel, S. (2021). PENGEMBANGAN E-MODUL KIMIA BERBASIS STEM DENGAN Development of Stem-Based Chemical E-Modules with Etnoscience Approach. https://doi.org/10.29303/cep.v4i2.2768

Pangesti, K. I., Yulianti, D., & Sugianto. (2017). Bahan Ajar Berbasis STEM (Science, Technology, Engineering, and Mathematics) untuk Meningkatkan Penguasaan KonsepSiswa SMA. Unnes Physics Education Journal, 6(3), 53–58. https://journal.unnes.ac.id/sju/index.php/upej/article/view/19270

Rahman, L., Silaban, R., & Nur, N. (2021). Pengembangan E-Modul Kimia Berbantuan Flip Pdf Professional Untuk Pembelajaran Kimia Non Logam Pada Pokok Bahasan Karbon Dan Silikon. Duconomics Sci-Meet (Education & Economics Science Meet), 1, 185–191. https://doi.org/10.37010/duconomics.v1.5440

Rejeki, S., & Azis, A. A. (2022). LKPD Berorientasi HOTS Pada Materi Biologi kelas X di SMA Kristen Rantepao Student Worksheet Oriented to HOTS On Biology Subject For Grade X th at SMA Kristen Rantepao. 218–231. https://doi.org/10.32528/bioma.v7i2.7775

Setyawan, R. A., & Atapukan, W. F. (2018). Pengukuran Usability Website E-Commerce Sambal Nyoss Menggunakan Metode Skala Likert. Compiler, 7(1), 54–61. https://doi.org/10.28989/compiler.v7i1.254

Suryani, K., Utami, I. S., & Rahmadani, A. F. (2020). Pengembangan Modul Digital berbasis STEM menggunakan Aplikasi 3D FlipBook pada Mata Kuliah Sistem Operasi. 25(3), 358–367.

Susanti, L. Y. (2018). Penerapan Media Pembelajaran Kimia Berbasis Science, Technology, Engineering, and Mathematics (Stem) Untuk Meningkatkan Hasil Belajar Siswa Sma/ Smk Pada Materi Reaksi Redoks. Jurnal Pendidikan Sains (Jps), 6(2), 32. https://doi.org/10.26714/jps.6.2.2018.32-40

Tarbiyah, F., Ib, U. I. N., Modul, P. E.-, Berbasis, F., Kiswanda, V., Aswirna, P., Islam, U., Imam, N., Padang, B., Yunus, J. M., & Lintah, L. (n.d.). JOURNAL CERDAS MAHASISWA Fakultas Tarbiyah dan Keguruan UIN IB Padang. 62–75.

Ummah, M., Rusilowati, A., & Yulianti, I. (2018). Pengembangan Bahan Ajar Berbasis Literasi Sains Materi Gelombang Cahaya. UPEJ Unnes Physics Education Journal, 7(3), 51–57

Downloads

Additional Files

Published

2023-07-20

How to Cite

Nanda, A., & Rahmah, S. (2023). Development of STEM-Based E-Modules on Colloid Material to Train Scientific Literacy Skills. Jurnal Teknologi Pendidikan : Jurnal Penelitian Dan Pengembangan Pembelajaran, 8(3), 610–623. https://doi.org/10.33394/jtp.v8i3.7614

Issue

Vol. 8 No. 3 (2023): July

Section

Articles

Citation Check

License

License and Publishing Agreement
In submitting the manuscript to the journal, the authors certify that:

  • They are authorized by their co-authors to enter into these arrangements.
  • The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
  • That it is not under consideration for publication elsewhere,
  • That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
  • They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
  • They agree to the following license and publishing agreement.

Copyright

  1. Authors who publish with JTP agree to the following terms:
  2. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. Licensing for Data Publication

Licensing for Data Publication

JTP use a variety of waivers and licenses, that are specifically designed for and appropriate for the treatment of data:
Open Data Commons Attribution License, http://www.opendatacommons.org/licenses/by/1.0/ (default)